Black Friday is coming! Learn more

We Messed Up the Model Citizen Armor

We Messed Up the Model Citizen Armor

Team Cyber |

We screwed up.

When we first made the B-22 Model Citizen armor from Helldivers 2, we were sure we'd recreated the in-game design accurately. The shape was right, all the details were there, and the black finish looked just like our references.

But then Helldivers fans pointed out something we'd missed: the armor was supposed to be reflective, not black.

And the game had been showing us the correct color all along.

How Did We Get the Color So Wrong?

The problem was with our references.

We studied the Model Citizen armor in the Armory aboard the Super Destroyer. The environment there is dark, and the armor's mirror-like surface reflects everything around it.

We mistook those reflections for black paint.

When we later looked at gameplay screenshots under different lighting conditions, everything became clear: the surface was reflective and had simply been mirroring the dark surroundings.

By then, our black version was already finished. But it wasn't the Model Citizen we'd intended to make. So we decided to start over.

This time, we made the costume for our friend calebweekss.

Starting Over

The first step was making the hard armor pieces.

We used ABS plastic for the main plates. Each sheet was heated until it became flexible, then shaped using a vacuum-forming machine.

Getting the timing and temperature right was important. If the plastic wasn't heated enough, it wouldn't follow the mold's geometry. If it was overheated, the piece could deform.

Once the plastic cooled, we trimmed away the excess, cleaned up the edges, and sanded the surfaces.

Vacuum-formed ABS armor plates and finished components

For smaller details, we used casting. This allowed us to reproduce shapes and textures that were difficult to achieve with vacuum forming.

We also cast the helmet, then manually removed the excess material and finished its surface.

Manual finishing of armor components and helmet parts

How We Turned Plastic into Chrome

This was the stage where we had to correct the biggest mistake from our first version. We needed a mirror-like surface that reflected light the same way the armor did in the game.

A metallic effect can be achieved with different types of paint. We chose a chrome finish. The number and thickness of the coats were especially important: too much made the surface too light, while too little made it too dark. And we could only evaluate the final result after the coating had completely dried.

First, we primed each piece and sanded the surface again.

Then we applied a black base coat. It created depth beneath the chrome finish.

Over that, we applied several thin coats of chrome paint until we achieved the reflective surface we wanted.

Black base coat and chrome finish on the armor

Next came the protective clear coat. It needed to preserve the reflections without making the armor excessively glossy.

A gloss clear coat produced too much shine and overly polished reflections. A matte finish, on the other hand, eliminated the shine and the chrome effect.

So we started experimenting with a satin clear coat, mixing it with gloss in different proportions, applying the mixtures, and comparing the results.

Eventually, we found the right ratio: the chrome retained its reflective properties without looking excessively glossy.

Applying protective coatings and finishing the chrome components

The surface finally looked like what we'd seen in the game.

Armor Alone Wasn't Enough

While the armor was being painted, we also worked on the clothing underneath.

We made the Model Citizen undersuit from thick faux leather.

Most of the work went into sewing the visible padding beneath the hard armor and the padded inserts that helped create the correct volume and fit.

Sewing the Model Citizen undersuit

We also installed adjustable straps and fasteners to position the armor pieces exactly where they needed to be.

We completed the look with a removable cape, a functional belt, pouches, and gloves. We made these ourselves, too.

Putting Model Citizen Back Together

After painting and sewing were complete, we moved on to final assembly.

And this was when we finally saw the corrected Model Citizen as a complete costume, now with its mirror-like finish.

One mistake in interpreting the game references had forced us to go through the entire costume-making process again.

The Final Test: Model Citizen on Caleb

All that remained was to see how the costume looked on the person we'd made it for.

calebweekss received the corrected Model Citizen, and we finally got to see the armor on a cosplayer instead of in our workshop.

The completed Model Citizen costume with its reflective chrome finish

In the end, this mistake showed us something important: lighting in a game can dramatically change how a material appears. And sometimes, one set of references simply isn't enough.

Our community noticed what we'd missed. We listened and remade Model Citizen with the mirror-like armor it was supposed to have in the game.

As for the original black version, it stayed in our product lineup. It wasn't canon-accurate, but the black satin armor turned out to be popular with many people.

Leave a comment

Please note: comments must be approved before they are published.